LY-C40PV 3S Na'urar Kariya ta Surge
LY-C40PV 3S Na'urar Kariya ta Surge
Bayanan fasaha
| Nau'in | |
| SPD bisa ga EN 61643-31 / IEC 61643-31 | nau'in 1+2 / class I+II |
| Max.ci gaba da aiki DC ƙarfin lantarki (DC+)-PE, (DC-) PE, (DC+)-(DC-) Ucpv | 1500 V DC |
| Nau'in fitarwa na yanzu (8/20μs) In | 20 ka |
| Matsakaicin fitarwa na yanzu (8/20μs) Imax | 40 ka |
| Matsakaicin ƙarfin halin yanzu (8/20μs) Itotal | 40 ka |
| Matsakaicin ƙarfin halin yanzu (10/350μs) Iimp | 6,25k ku |
| Matsakaicin ƙarfin halin yanzu (10/350μs) Itotal | 12.5k ku |
| ci gaba na yanzu don aikace-aikacen PV ICPV | 0.2mA ku |
| Matsayin kariyar ƙarfin lantarki (DC+)-PE, (DC-)-PE (DC+)-(DC-) Up | 5.0 kV |
| Lokacin amsa tA | 25 ns (LN) |
| Ƙididdiga na Gajerun Da'irar Yanzu Iscpv | 2000 A |
| Ragowar ac da dc IPE | 0.3mA(DC), 0.3mA(AC), |
| Yanayin zafi | 5% ... 95% |
| Yawan zafin jiki na aiki TU | -40°C ... +70°C |
| Matsin yanayi da tsayi | 80k Pa ... 106k Pa, -500 m ... 2000 m |
| Alamar aiki/laifi mai aiki | Koren ok / Lalacewar ja |
| Yawan tashoshin jiragen ruwa | Tashar ruwa ɗaya |
| Wuraren yanki (max.) | 2 AWG (Ƙarfafa, Matsala) / 4 AWG (mai sassauci) 35 mm2 (Maɗaukaki, Maɗaukaki) / 25 mm2 (Mai sassauci) |
| Don hawa kan | 35 mm DIN dogo acc.Bayani na EN 60715 |
| Abun rufewa | thermoplastic |
| Wurin shigarwa | shigarwa na cikin gida |
| Digiri na kariya | IP20 |
| Iyawa | 4 module(s), DIN 43880 |
| Amincewa | - |
| Nau'in lambar sadarwar sigina mai nisa | musanya lamba |
| ac sauya iya aiki | 250V / 0.5 A |
| dc iya canzawa | 250V / 0.1 A;125V / 0.2 A;75V / 0.5 A |
| Wurin ƙetarewa don tashoshin sigina mai nisa | max.1.5 mm2m / m |
| Yanayin sigina mai nisa | Na al'ada: rufe;gazawa: bude-da'ira |
| Dama | Ba zai yuwu ba |
| Fuction na kariya | Yawanci |
| PV tsarin ƙasa | Kasa da Kasa (duka) |
| Yanayin gazawar SPD (OCFM/SCFM) | OCFM |
Tsarin kewayawa
Shigarwa, Amfani da Kulawa
ƙwararrun ƙwararrun ƙwararrun ne kaɗai za a iya shigar da wannan samfurin.Ba za a iya taɓa wurin shigarwa da hannu ba.Tabbatar cewa ba ta da ƙarfi kuma duba ko SPD ba ta da kyau kafin shigarwa.Idan akwai lalacewa ko taga nuni ja ne, ba za a iya ƙara amfani da SPD ba;idan taga kore ne, SPD al'ada ce.
Shigar da SPD ya kamata a dogara da siffa 3 IEC 60364-5-53.Yankin giciye na waya na ƙasa bai kamata ya zama ƙasa da 4 mm2 ba, kuma tsawon jimlar gubar bai wuce 0.5m ba.
Matsakaicin mafi ƙarancin nisa daga kowane saman ƙasa wanda za'a iya shigar da SPD shine 8mm.
Haɗin ƙararrawar sigina mai nisa: Ana ba da SPD tare da musaya na sigina na nesa (NC, COM da NO, yawanci rufewa), masu dacewa don saka idanu na nesa ko ƙararrawa.
Bayan haɗin, duba idan an shigar da tsarin a ciki. Idan haka ne, NC da COM suna rufe;in ba haka ba, danna module.
Tsarin Waya
KASHIN KYAUTA
Mayar da hankali kan samar da mafita na mongpu na shekaru 5.
